-
Treat a friend, family member or loved one with one of our gift vouchers. Ideal for any special occasion and can be spent on anything in store. Simply select the value of the voucher you wish to purchase, write a personalised message, then go to checkout. We will then send your voucher out to you. -
£49.20 including VAT
A steel and aluminium dash top Puma Pod for fitting extra switches, gauges and controls to your Puma.
Designed to very exacting standards, the Puma Pod is shaped to fit the Puma only, nesting between the air vents which makes this Pod look like the original equipment whilst offering additional space to a very restrictive dashboard.
There are 4 standard panels available as well as the addition of a custom cut service for your specific needs.
Front panel choices:
PP1 Plain panel to cut to your own requirement
PP2 4x 52mm diameter for 4 gauges
PP5 All Carling Switches
PP6 2x 52mm Holes For Gauges & 4x Carling Switches
Special Cuts
There is an extra charge of £12.00 (+VAT) for a special cut panel due to programming.
Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
Then tick "I would like to provide my own specifications (£12.00 + VAT)" and provide your specifications in the box provided.
-
The all steel one piece Puma Glove Box comes ready to fit, no fiddly hinges to fit or line up. The Raptor Puma Glove Box has the hinges already fitted to the steel frame and lid panel. If you can use a screwdriver you can fit this in literally 5 minutes. -
Series 111 Binnacle Trim in Anodised Silver. To enhance the look of your existing S111 Binnacle or complement your exiting Raptor products. This also fixes the typical issue where the plastic is broken away round the fixing holes. No more washers and superglue. ( Uses your existing screws )
This product is the Facia Trim only and does not include the Binnacle or Binnacle Mount. For the S111 Binnacle Mount please click here.
-
£34.00 including VAT This is a replacement bottom panel only for those who already own a Raptor Console. If you are requiring a complete console please see Defender and S111 Console Dash. The panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. If you have a special Raptor Air Conditioning Console you must let us know prior to placing your order as you will need a Special cut panel. Special Cuts. Please scroll down the page for panel layout information- There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.
- Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
-
£24.00 including VATIncludes Bezel and Switch Plate. Fits perfectly over your existing plastic Binnacle, available in anodised silver or black.
PLEASE NOTE THAT THIS BEZEL IS SUITABLE WITH THE ORIGINAL PLASTIC BINNACLE ONLY AND NOT THE RAPTOR STEEL BINNACLE
-
This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in an S111
This part has been produced by Raptor due to constant requests from Series 111 owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
As with all Raptor parts this has a lifetime guarantee.
-
Out of stock
40 Dash Board Switch Decals These labels are available in silver with black lettering. The self adhesive labels include:- Winch Arm
- Fan
- F Winch
- Winch in
- Winch out
- R winch
- R locker
- F locker
- Fuel
- Charge
- Panic
- Battery 1
- Battery 2
- Spots 1
- Spots 2
- Sidelights
- Driving
- Roof lights
- Hazard
- Gas
- NOS
- Fog lights
- LEDs
- Headlights
- Strobe
- Rear work
- Front work
- Interior light
- Master
- Kill
- Winch out
- Map
- Siren
- Fridge
- Search
- Inverter
- Marker
- Auxiliary 1
- Compressor
- Pump
- Ejector Seat
-
£78.00 including VAT
Powder coated steel construction with a choice of anodised aluminium front panels in silver or black. 400mm length x 100mm height x 185mm deep. Supplied with all fixings - simply bolts to the top of the original Discovery Dash (bolts pass through vent so no visual holes to drill through the dash). Fits Discovery as pictured and the soft dash Range Rover.
Special Cuts
When designing your custom layout please note the panel size: Length 395mm at the bottom, 360mm at the top. Height is 95mm. There is a frame at the back so you will need to have the holes a minimum of 15mm in from each edge.- There is an extra charge of £12.00 +VAT for a special cut panel due to programming.
- Please ensure you choose the blank "D10 Please select this panel if you require a special cut" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00 + VAT) and provide your specifications in the box provided.
-
(Bezel £18.00 including vat, Switch Plate £7.20 including vat)Available for pre-2000 Defenders (prior to TD5 Dash Facelift) and post-2000 to fit the Raptor Defender Binnacle
For those of you with our standard Raptor Steel Defender Binnacle wishing to upgrade to a Deluxe version, an anodised aluminium Bezel is available in Black or Silver to match and complement your existing Raptor Products.
Image 1 - Black Bezel
Image 2 - Silver Bezel
Images 3 & 5 - Examples of Deluxe Binnacle with Silver Bezel
Images 4 & 6 - Examples of Deluxe Binnacle with Black Bezel
Image 7 - Optional switch plate (available in black or silver)
PLEASE NOTE: This product is the BEZEL ONLY. The Defender Binnacle can be purchased separately here.
THIS BEZEL IS NOT SUITABLE FOR THE ORIGINAL PLASTIC BINNACLE
-
£250.00 including VAT - available to ship 2-3 working days from payment
Made to the usual high Raptor Engineering standards, this Cubby Box is designed to complement the Raptor Dash Console and Accessories with it's anodised aluminium panels front and back.
Fits 90's Dimensions are 580mm long at its base, 230mm wide and 370mm height. This Cubby Box is not your usual fit all and nothing in particular, this is made to fit the Defender 90 perfectly.
PLEASE NOTE THAT OUR CUBBY BOX IS NOT AVAILABLE FOR OVERSEAS SHIPPING
-
20 Amp ON-OFF-ON Winch Rocker Switch, sprung to centre making it ideal for winch control.
These switches are the same size and fitting as the Carling type switch at half the price.
The switches have a red and green LED that lights up when activated.
They are compatible with all Raptor none round switch cut outs.
Custom Land Rover Accessories, Made by Enthusiasts, for Enthusiasts
