£2.95 including VAT
12 V, 20 Amp Switch, available with Red or Blue Light
-
12v/20amp Socket
For 29mm Diameter Hole
-
Cup Holder to be attached anywhere in the vehicle.
-
Out of stock
40 Dash Board Switch Decals These labels are available in silver with black lettering. The self adhesive labels include:- Winch Arm
- Fan
- F Winch
- Winch in
- Winch out
- R winch
- R locker
- F locker
- Fuel
- Charge
- Panic
- Battery 1
- Battery 2
- Spots 1
- Spots 2
- Sidelights
- Driving
- Roof lights
- Hazard
- Gas
- NOS
- Fog lights
- LEDs
- Headlights
- Strobe
- Rear work
- Front work
- Interior light
- Master
- Kill
- Winch out
- Map
- Siren
- Fridge
- Search
- Inverter
- Marker
- Auxiliary 1
- Compressor
- Pump
- Ejector Seat
-
This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in a Defender.
This part has been produced by Raptor due to constant requests from Defender owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
Our Binnacle Mount is suitable for both RHD and LHD vehiclesImage 1 - Defender Binnacle Mount
Image 2 - Example of Defender Binnacle Mount supporting the original plastic Binnacle
As with all Raptor parts this has a lifetime guarantee.
-
£24.00 including VATIncludes Bezel and Switch Plate. Fits perfectly over your existing plastic Binnacle, available in anodised silver or black.
PLEASE NOTE THAT THIS BEZEL IS SUITABLE WITH THE ORIGINAL PLASTIC BINNACLE ONLY AND NOT THE RAPTOR STEEL BINNACLE
-
£49.20 including VAT
Fits Defender & Series 111 up to year 2000 (prior to TD5 Dash Facelift) Suitable for RHD Vehicles only.
Works well as a stand alone product or will complement your Raptor Dash Console, giving lockable out of sight storage in your Dashboard.
The Glove Box is made to the usual high quality Raptor standards from steel and aluminium. The frame is powder coated in black with the choice of black or silver for the aluminium door.
The Glove Box has a vented top so your vents are still functional, letting air flow through the Glove Box into the cab.
Although not a necessity we highly recommend that the Glove Box is fitted along with the optional Raptor Defender Trim Panels for an aesthetically pleasing finish to your dashboard.
Please note the Raptor Defender Trim Panels can only be used if you have the Raptor Dash Console fitted.
-
Due to popular demand Raptor has produced this two-part dash trim that will dramatically improve the look of your dashboard (RHD).
Many Defenders & S111 have been drilled, cut and carved in the soft facia of the dash. Many more have a bad fit and uneven joint between the main dash and corner piece. This steel trim will tidy the cut out in your dashboard and create a perfect fit up to the Raptor Console and also gives the opportunity to securely fit other items to your dash.
PLEASE NOTE OUR TRIM PANELS ARE NOT SUITABLE/COMPATIBLE WITH AIRCON FITTED -
(Standard Binnacle £82.50 including vat, Deluxe Binnacle £92.50 including vat, Switch Plate £7.20 including vat)A direct replacement for the poor plastic original RHD Binnacle that is broken in many Land Rovers.
The Standard Unit is made from steel with a black powder coat finish. (Image 1 - main image). If you choose to go with the Standard Unit a Bezel in anodised black or silver may be purchased at a later date if required.
For those of you with a Raptor Console or those wishing to upgrade, a Deluxe version is available with an anodised aluminium bezel, available in Black or Silver to match and complement your existing Raptor Console (Images 2 & 3). It is also aesthetically pleasing and gives your gauges a slightly recessed look.
Image 4 - Example of Deluxe Binnacle with Silver Bezel
Image 5 - Example of Deluxe Binnacle with Black Bezel
Image 6 - Optional Switch Plate. This is the replacement for the original Switch Plate located down at your right knee in a Defender, available in anodised silver or black. The hole cut-outs are: 31mm height, 23mm width. Please note this Switch Plate is not suitable or available for Carling/Carling Type Switches.
PLEASE NOTE THAT BOTH THE STANDARD AND DELUXE MODELS DO NOT INCLUDE THE GAUGES ETC.
Although this Binnacle will connect to the original Plastic Binnacle Mount in your Landrover we highly recommend the use of the steel Raptor Binnacle Mount.
No more rattling dashboards, no more broken plastic tabs.
IMPORTANT READ THIS Around the year 2000 (as early as 1998 and as late as 2002) Landrover fitted both pre and post 2000 Binnacles especially NAS. If your Binnacle has the 2 screws holding the warning light cluster in from the front (arrowed in main picture) you need a pre-2000 regardless of the year or registration. If your Binnacle doesn’t have the 2 screws and the cluster is fitted from the back you need a post-2000 regardless of the year of registration. Please note our steel replacement does not have the heater/fan illumination.PLEASE NOTE: If you wish to purchase the Raptor Binnacle BEZEL ONLY, they are available here >
-
£250.00 including VAT - available to ship 2-3 working days from payment
Made to the usual high Raptor Engineering standards, this Cubby Box is designed to complement the Raptor Dash Console and Accessories with it's anodised aluminium panels front and back.
Fits 90's Dimensions are 580mm long at its base, 230mm wide and 370mm height. This Cubby Box is not your usual fit all and nothing in particular, this is made to fit the Defender 90 perfectly.
PLEASE NOTE THAT OUR CUBBY BOX IS NOT AVAILABLE FOR OVERSEAS SHIPPING
-
This product fits perfectly under your Raptor Dash Console and provides a useful storage space. Dimensions are 270mm (Length) x 50mm (Height) x 105mm (Depth) Please note that this product is only compatible with our Standard Raptor Dash Console. It is not suitable with air conditioning fitted or with our Double Din Dash Console. -
£6.00 including VAT
Set of 4 LED Lights.
These fit in the pre machined holes in all Raptor dash console.
The floor and transmission tunnel area of Defenders and S111 are extremely dark even with the interior light on. Drop something and all you can do is feel around for it. These LEDs are just enough to light this area whilst using a very small amount of battery power.