Products Archive - Raptor Engineering

Defender Binnacle Mount

Rated 5.00 out of 5
£37.08 £44.50 inc.VAT

This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in a Defender.

This part has been produced by Raptor due to constant requests from Defender owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
Our Binnacle Mount is suitable for both RHD and LHD vehicles
Image 1 - Defender Binnacle Mount

Image 2 - Example of Defender Binnacle Mount supporting the original plastic Binnacle

As with all Raptor parts this has a lifetime guarantee.

Add to basket Details
Defender & S111 Glove Box

Rated 5.00 out of 5
£41.00

£49.20 including VAT

Fits Defender & Series 111 up to year 2000 (prior to TD5 Dash Facelift) Suitable for RHD Vehicles only.

Works well as a stand alone product or will complement your Raptor Dash Console, giving lockable out of sight storage in your Dashboard.

The Glove Box is made to the usual high quality Raptor standards from steel and aluminium. The frame is powder coated in black with the choice of black or silver for the aluminium door.

The Glove Box has a vented top so your vents are still functional, letting air flow through the Glove Box into the cab.

Although not a necessity we highly recommend that the Glove Box is fitted along with the optional Raptor Defender Trim Panels for an aesthetically pleasing finish to your dashboard.

Please note the Raptor Defender Trim Panels can only be used if you have the Raptor Dash Console fitted.

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender & S111 Trim Panel

Rated 5.00 out of 5
£23.00 £27.60 inc.VAT

Due to popular demand Raptor has produced this two-part dash trim that will dramatically improve the look of your dashboard (RHD).

Many Defenders & S111 have been drilled, cut and carved in the soft facia of the dash. Many more have a bad fit and uneven joint between the main dash and corner piece. This steel trim will tidy the cut out in your dashboard and create a perfect fit up to the Raptor Console and also gives the opportunity to securely fit other items to your dash.
PLEASE NOTE OUR TRIM PANELS ARE NOT SUITABLE/COMPATIBLE WITH AIRCON FITTED

Add to basket Details
Defender Binnacle

Rated 5.00 out of 5
£68.75 – £83.08

(Standard Binnacle £82.50 including vat, Deluxe Binnacle £92.50 including vat, Switch Plate £7.20 including vat)
A direct replacement for the poor plastic original RHD Binnacle that is broken in many Land Rovers.

The Standard Unit is made from steel with a black powder coat finish. (Image 1 - main image). If you choose to go with the Standard Unit a Bezel in anodised black or silver may be purchased at a later date if required.

For those of you with a Raptor Console or those wishing to upgrade, a Deluxe version is available with an anodised aluminium bezel, available in Black or Silver to match and complement your existing Raptor Console (Images 2 & 3). It is also aesthetically pleasing and gives your gauges a slightly recessed look.

Image 4 - Example of Deluxe Binnacle with Silver Bezel

Image 5 - Example of Deluxe Binnacle with Black Bezel

Image 6 - Optional Switch Plate. This is the replacement for the original Switch Plate located down at your right knee in a Defender, available in anodised silver or black. The hole cut-outs are: 31mm height, 23mm width. Please note this Switch Plate is not suitable or available for Carling/Carling Type Switches.

PLEASE NOTE THAT BOTH THE STANDARD AND DELUXE MODELS DO NOT INCLUDE THE GAUGES ETC.

Although this Binnacle will connect to the original Plastic Binnacle Mount in your Landrover we highly recommend the use of the steel Raptor Binnacle Mount.

No more rattling dashboards, no more broken plastic tabs.
IMPORTANT READ THIS Around the year 2000 (as early as 1998 and as late as 2002) Landrover fitted both pre and post 2000 Binnacles especially NAS. If your Binnacle has the 2 screws holding the warning light cluster in from the front (arrowed in main picture) you need a pre-2000 regardless of the year or registration. If your Binnacle doesn’t have the 2 screws and the cluster is fitted from the back you need a post-2000 regardless of the year of registration. Please note our steel replacement does not have the heater/fan illumination.
PLEASE NOTE: If you wish to purchase the Raptor Binnacle BEZEL ONLY, they are available here >

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender Cubby Box

Rated 5.00 out of 5
£208.33

£250.00 including VAT - available to ship 2-3 working days from payment

Made to the usual high Raptor Engineering standards, this Cubby Box is designed to complement the Raptor Dash Console and Accessories with it's anodised aluminium panels front and back.

Fits 90's Dimensions are 580mm long at its base, 230mm wide and 370mm height. This Cubby Box is not your usual fit all and nothing in particular, this is made to fit the Defender 90 perfectly.

PLEASE NOTE THAT OUR CUBBY BOX IS NOT AVAILABLE FOR OVERSEAS SHIPPING

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender & S111 Under Tray

Rated 5.00 out of 5
£9.58 £11.50 inc.VAT

This product fits perfectly under your Raptor Dash Console and provides a useful storage space. Dimensions are 270mm (Length) x 50mm (Height) x 105mm (Depth) Please note that this product is only compatible with our Standard Raptor Dash Console. It is not suitable with air conditioning fitted or with our Double Din Dash Console.

Add to basket Details
LED Lights

Rated 5.00 out of 5
£5.00

£6.00 including VAT

Set of 4 LED Lights.

These fit in the pre machined holes in all Raptor dash console.

The floor and transmission tunnel area of Defenders and S111 are extremely dark even with the interior light on. Drop something and all you can do is feel around for it. These LEDs are just enough to light this area whilst using a very small amount of battery power.

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender & S111 Pod

Rated 5.00 out of 5
£41.00
£49.20 including VAT Steel Dash Top Pod with a choice of interchangeable aluminium front panels. Easily fitted in 5 minutes with supplied clamp that utilises the ash tray hole so there are no holes to drill in your dashboard. Front view is 330mm long at the bottom, 300mm long at the top and 90mm high. Depth is 90mm at the bottom and 80mm at the top. Height at the back is 60mm. Please note the Gauges/Switches & Sockets are not included.
P1 Plain panel to cut to your own requirement

P2 4x 52mm diameter for 4 gauges

P3 2x 29mm Holes For 12v Sockets, 5x Carling Switch Holes

P4 2x 29 mm Holes For 12v Sockets, 5x 12mm Holes for Toggle Switches

P5 7x Carling Switch Holes

P6 2 x 52mm gauges 4 x carling switches

Special Cuts

There is an extra charge of £12.00 (+VAT) for a special cut panel due to programming.

Please ensure you choose the blank "provide specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00 + VAT)" and provide your specifications in the box provided.
Select options This product has multiple variants. The options may be chosen on the product page Details
Puma Glove Box

Rated 5.00 out of 5
£41.00 £49.20 inc.VAT

The all steel one piece Puma Glove Box comes ready to fit, no fiddly hinges to fit or line up. The Raptor Puma Glove Box has the hinges already fitted to the steel frame and lid panel. If you can use a screwdriver you can fit this in literally 5 minutes.

Add to basket Details
Defender & S111 Console Dash

Rated 5.00 out of 5
£79.17
£95.00 including VAT Suitable for pre 2000 Defender & Series 111 (prior to TD5 Dash Facelift). The main body of the dash is a fully welded steel construction with a resilient powder coat finish. The front panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. The Raptor Dash Console is supplied complete with a top and bottom panel of your choice, CB mounting brackets (fitted) if required, a full size fitting template, spare screws and an allen key for removal and re fitting of the front panels. Please scroll down the page for panel descriptions. The Console can be fitted in around 20 mins with a few basic tools. IF YOUR VEHICLE HAS AIR CONDITIONING YOU MUST LET US KNOW PRIOR TO PLACING AN ORDER AS YOU WILL NEED A CUSTOM AIRCON CONSOLE (£93.33 + VAT) Special Cuts. Please scroll down the page for panel layout information

There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.

PLEASE NOTE - Panel T9 , T16 & T17 are not compatible with panels B1, B3, B6, B7, B8
Need help with fitting? Watch this video >
Select options This product has multiple variants. The options may be chosen on the product page Details
Discovery Dash Console

Rated 5.00 out of 5
£65.00
£78.00 including VAT

Powder coated steel construction with a choice of anodised aluminium front panels in silver or black. 400mm length x 100mm height x 185mm deep. Supplied with all fixings - simply bolts to the top of the original Discovery Dash (bolts pass through vent so no visual holes to drill through the dash). Fits Discovery as pictured and the soft dash Range Rover.

Special Cuts
When designing your custom layout please note the panel size: Length 395mm at the bottom, 360mm at the top. Height is 95mm. There is a frame at the back so you will need to have the holes a minimum of 15mm in from each edge.

There is an extra charge of £12.00 +VAT for a special cut panel due to programming.

Please ensure you choose the blank "D10 Please select this panel if you require a special cut" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00 + VAT) and provide your specifications in the box provided.
Select options This product has multiple variants. The options may be chosen on the product page Details
12 V LED Switch

£2.46

£2.95 including VAT

12 V, 20 Amp Switch, available with Red or Blue Light

Select options This product has multiple variants. The options may be chosen on the product page Details

Shop