Products Archive - Raptor Engineering

Defender Binnacle Mount

Rated 5.00 out of 5
£37.08 £44.50 inc.VAT

This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in a Defender.

This part has been produced by Raptor due to constant requests from Defender owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
Our Binnacle Mount is suitable for both RHD and LHD vehicles
Image 1 - Defender Binnacle Mount

Image 2 - Example of Defender Binnacle Mount supporting the original plastic Binnacle

As with all Raptor parts this has a lifetime guarantee.

Add to basket Details
Defender Binnacle

Rated 5.00 out of 5
£68.75 – £83.08

(Standard Binnacle £82.50 including vat, Deluxe Binnacle £92.50 including vat, Switch Plate £7.20 including vat)
A direct replacement for the poor plastic original RHD Binnacle that is broken in many Land Rovers.

The Standard Unit is made from steel with a black powder coat finish. (Image 1 - main image). If you choose to go with the Standard Unit a Bezel in anodised black or silver may be purchased at a later date if required.

For those of you with a Raptor Console or those wishing to upgrade, a Deluxe version is available with an anodised aluminium bezel, available in Black or Silver to match and complement your existing Raptor Console (Images 2 & 3). It is also aesthetically pleasing and gives your gauges a slightly recessed look.

Image 4 - Example of Deluxe Binnacle with Silver Bezel

Image 5 - Example of Deluxe Binnacle with Black Bezel

Image 6 - Optional Switch Plate. This is the replacement for the original Switch Plate located down at your right knee in a Defender, available in anodised silver or black. The hole cut-outs are: 31mm height, 23mm width. Please note this Switch Plate is not suitable or available for Carling/Carling Type Switches.

PLEASE NOTE THAT BOTH THE STANDARD AND DELUXE MODELS DO NOT INCLUDE THE GAUGES ETC.

Although this Binnacle will connect to the original Plastic Binnacle Mount in your Landrover we highly recommend the use of the steel Raptor Binnacle Mount.

No more rattling dashboards, no more broken plastic tabs.
IMPORTANT READ THIS Around the year 2000 (as early as 1998 and as late as 2002) Landrover fitted both pre and post 2000 Binnacles especially NAS. If your Binnacle has the 2 screws holding the warning light cluster in from the front (arrowed in main picture) you need a pre-2000 regardless of the year or registration. If your Binnacle doesn’t have the 2 screws and the cluster is fitted from the back you need a post-2000 regardless of the year of registration. Please note our steel replacement does not have the heater/fan illumination.
PLEASE NOTE: If you wish to purchase the Raptor Binnacle BEZEL ONLY, they are available here >

Select options This product has multiple variants. The options may be chosen on the product page Details
12 V LED Switch

£2.46

£2.95 including VAT

12 V, 20 Amp Switch, available with Red or Blue Light

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender & S111 Console Dash

Rated 5.00 out of 5
£79.17
£95.00 including VAT Suitable for pre 2000 Defender & Series 111 (prior to TD5 Dash Facelift). The main body of the dash is a fully welded steel construction with a resilient powder coat finish. The front panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. The Raptor Dash Console is supplied complete with a top and bottom panel of your choice, CB mounting brackets (fitted) if required, a full size fitting template, spare screws and an allen key for removal and re fitting of the front panels. Please scroll down the page for panel descriptions. The Console can be fitted in around 20 mins with a few basic tools. IF YOUR VEHICLE HAS AIR CONDITIONING YOU MUST LET US KNOW PRIOR TO PLACING AN ORDER AS YOU WILL NEED A CUSTOM AIRCON CONSOLE (£93.33 + VAT) Special Cuts. Please scroll down the page for panel layout information

There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.

Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.

PLEASE NOTE - Panel T9 , T16 & T17 are not compatible with panels B1, B3, B6, B7, B8
Need help with fitting? Watch this video >
Select options This product has multiple variants. The options may be chosen on the product page Details
Out of stock

On-Off Carling Type Rocker Switch

£4.58 £5.50 inc.VAT

20 Amp ON - OFF rocker Switch.

The same size and fittings as a Carling type switch at half the price.

Compatible with all Raptor none round switch cut outs.

These switches have a red LED that lights up when switched on.

Details
Raptor Defender Binnacle End Panel (Steel)

£20.83 – £25.00

(Standard Binnacle End Panel £25.00 including vat, Binnacle End Panel with Switch Pod £30.00 inc vat) A quality replacement for the poor original plastic Binnacle End Panel. Manufactured in Steel, powder-coated black to complement the look of your existing Raptor Products and Dashboard. If you have the Raptor steel Binnacle and Mount this replaces the last bit of plastic in and around the Binnacle. Transforms the heater controls as they are now held in position with steel and not plastic Comes complete with all fixtures and fittings including a new much stronger fixing point than the original. No drilling or cutting needed just a screwdriver and Allen Key. (Important we only guarantee the fit of this product if you have the Raptor Steel Binnacle and Mount) Also available complete with a 2 Carling Switch Pod (Switches not included) Image 1 Standard Binnacle End Panel Image 2 Binnacle End Panel complete with a 2 Switch Pod (Switches not included) Image 3 Example of Standard Binnacle End Cap Fitted Image 4 Example of Binnacle End Cap with Switch Pod Fitted

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender & S111 Trim Panel

Rated 5.00 out of 5
£23.00 £27.60 inc.VAT

Due to popular demand Raptor has produced this two-part dash trim that will dramatically improve the look of your dashboard (RHD).

Many Defenders & S111 have been drilled, cut and carved in the soft facia of the dash. Many more have a bad fit and uneven joint between the main dash and corner piece. This steel trim will tidy the cut out in your dashboard and create a perfect fit up to the Raptor Console and also gives the opportunity to securely fit other items to your dash.
PLEASE NOTE OUR TRIM PANELS ARE NOT SUITABLE/COMPATIBLE WITH AIRCON FITTED

Add to basket Details
12v Socket

£4.58 £5.50 inc.VAT

12v/20amp Socket

For 29mm Diameter Hole

Add to basket Details
Stainless Steel Upgrade Screws

£3.04 £3.65 inc.VAT

Polished stainless screws (pack of 20) an upgrade to the standard screws supplied with the Dash Console and Pod. These are marine grade stainless steel and will never rust or tarnish.

Add to basket Details
Defender & S111 Glove Box

Rated 5.00 out of 5
£41.00

£49.20 including VAT

Fits Defender & Series 111 up to year 2000 (prior to TD5 Dash Facelift) Suitable for RHD Vehicles only.

Works well as a stand alone product or will complement your Raptor Dash Console, giving lockable out of sight storage in your Dashboard.

The Glove Box is made to the usual high quality Raptor standards from steel and aluminium. The frame is powder coated in black with the choice of black or silver for the aluminium door.

The Glove Box has a vented top so your vents are still functional, letting air flow through the Glove Box into the cab.

Although not a necessity we highly recommend that the Glove Box is fitted along with the optional Raptor Defender Trim Panels for an aesthetically pleasing finish to your dashboard.

Please note the Raptor Defender Trim Panels can only be used if you have the Raptor Dash Console fitted.

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender TD5 Conversion Panel

£41.66

£49.99 including VAT TD5 Conversion Panel ( Suitable for post 2000 vehicles with TD5 Dash uplift ) This panel is designed to fit over your original dash adding strength and rigidity to the plastic dashboard. It allows you to customise your dashboard adding switches/sockets and facilitates the fitting of either a standard Single or Double Din Radio Unit (Double Din cut out is 182mm x 101mm). If you purchase a panel with additional switches or a Double Din you will need to cut away the plastic as necessary Made from anodised aluminium , available in Silver or Black TD5 1   Standard Din Panel includes all original switch pattern with headlamp levelling* TD5 2 Standard Din Panel includes all original switch pattern without headlamp levelling
TD5 3  Double Din Panel (cut out is 182mm x 101mm) includes all original switch pattern with headlamp levelling*

TD5 4 Double Din Panel (cut out is 182mm x 101mm) includes all original switch pattern without headlamp levelling

TD5 5 Standard Din Panel with headlamp levelling* . The electric window and heated seat switch positions are replaced with Carling type switch cut outs

TD5 6 Standard Din Panel without headlamp levelling . The electric window and heated seat switch positions are replaced with Carling type switch cut outs

*Please note that the Headlamp Levelling Switch in your existing Console needs to be removed and refitted directly into the Raptor Panel (the spindle and knob for the switch are not long enough to be left in the original plastic component). This necessitates cutting out some clearance in your existing plastic panel.

The above configurations are the only panels available - custom cuts are not available for this product.

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender & S111 Under Tray

Rated 5.00 out of 5
£9.58 £11.50 inc.VAT

This product fits perfectly under your Raptor Dash Console and provides a useful storage space. Dimensions are 270mm (Length) x 50mm (Height) x 105mm (Depth) Please note that this product is only compatible with our Standard Raptor Dash Console. It is not suitable with air conditioning fitted or with our Double Din Dash Console.

Add to basket Details

Shop