-
(Standard Binnacle End Panel £25.00 including vat, Binnacle End Panel with Switch Pod £30.00 inc vat) A quality replacement for the poor original plastic Binnacle End Panel. Manufactured in Steel, powder-coated black to complement the look of your existing Raptor Products and Dashboard. If you have the Raptor steel Binnacle and Mount this replaces the last bit of plastic in and around the Binnacle. Transforms the heater controls as they are now held in position with steel and not plastic Comes complete with all fixtures and fittings including a new much stronger fixing point than the original. No drilling or cutting needed just a screwdriver and Allen Key. (Important we only guarantee the fit of this product if you have the Raptor Steel Binnacle and Mount) Also available complete with a 2 Carling Switch Pod (Switches not included) Image 1 Standard Binnacle End Panel Image 2 Binnacle End Panel complete with a 2 Switch Pod (Switches not included) Image 3 Example of Standard Binnacle End Cap Fitted Image 4 Example of Binnacle End Cap with Switch Pod Fitted -
Due to popular demand Raptor has produced this two-part dash trim that will dramatically improve the look of your dashboard (RHD).
Many Defenders & S111 have been drilled, cut and carved in the soft facia of the dash. Many more have a bad fit and uneven joint between the main dash and corner piece. This steel trim will tidy the cut out in your dashboard and create a perfect fit up to the Raptor Console and also gives the opportunity to securely fit other items to your dash.
PLEASE NOTE OUR TRIM PANELS ARE NOT SUITABLE/COMPATIBLE WITH AIRCON FITTED -
12v/20amp Socket
For 29mm Diameter Hole
-
Out of stock
20 Amp ON - OFF rocker Switch.
The same size and fittings as a Carling type switch at half the price.
Compatible with all Raptor none round switch cut outs.
These switches have a red LED that lights up when switched on.
-
£95.00 including VAT Suitable for pre 2000 Defender & Series 111 (prior to TD5 Dash Facelift). The main body of the dash is a fully welded steel construction with a resilient powder coat finish. The front panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. The Raptor Dash Console is supplied complete with a top and bottom panel of your choice, CB mounting brackets (fitted) if required, a full size fitting template, spare screws and an allen key for removal and re fitting of the front panels. Please scroll down the page for panel descriptions. The Console can be fitted in around 20 mins with a few basic tools. IF YOUR VEHICLE HAS AIR CONDITIONING YOU MUST LET US KNOW PRIOR TO PLACING AN ORDER AS YOU WILL NEED A CUSTOM AIRCON CONSOLE (£93.33 + VAT) Special Cuts. Please scroll down the page for panel layout information- There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.
- Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
Need help with fitting? Watch this video >
-
£2.95 including VAT
12 V, 20 Amp Switch, available with Red or Blue Light
-
(Standard Binnacle £82.50 including vat, Deluxe Binnacle £92.50 including vat, Switch Plate £7.20 including vat)A direct replacement for the poor plastic original RHD Binnacle that is broken in many Land Rovers.
The Standard Unit is made from steel with a black powder coat finish. (Image 1 - main image). If you choose to go with the Standard Unit a Bezel in anodised black or silver may be purchased at a later date if required.
For those of you with a Raptor Console or those wishing to upgrade, a Deluxe version is available with an anodised aluminium bezel, available in Black or Silver to match and complement your existing Raptor Console (Images 2 & 3). It is also aesthetically pleasing and gives your gauges a slightly recessed look.
Image 4 - Example of Deluxe Binnacle with Silver Bezel
Image 5 - Example of Deluxe Binnacle with Black Bezel
Image 6 - Optional Switch Plate. This is the replacement for the original Switch Plate located down at your right knee in a Defender, available in anodised silver or black. The hole cut-outs are: 31mm height, 23mm width. Please note this Switch Plate is not suitable or available for Carling/Carling Type Switches.
PLEASE NOTE THAT BOTH THE STANDARD AND DELUXE MODELS DO NOT INCLUDE THE GAUGES ETC.
Although this Binnacle will connect to the original Plastic Binnacle Mount in your Landrover we highly recommend the use of the steel Raptor Binnacle Mount.
No more rattling dashboards, no more broken plastic tabs.
IMPORTANT READ THIS Around the year 2000 (as early as 1998 and as late as 2002) Landrover fitted both pre and post 2000 Binnacles especially NAS. If your Binnacle has the 2 screws holding the warning light cluster in from the front (arrowed in main picture) you need a pre-2000 regardless of the year or registration. If your Binnacle doesn’t have the 2 screws and the cluster is fitted from the back you need a post-2000 regardless of the year of registration. Please note our steel replacement does not have the heater/fan illumination.PLEASE NOTE: If you wish to purchase the Raptor Binnacle BEZEL ONLY, they are available here >
-
This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in a Defender.
This part has been produced by Raptor due to constant requests from Defender owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
Our Binnacle Mount is suitable for both RHD and LHD vehiclesImage 1 - Defender Binnacle Mount
Image 2 - Example of Defender Binnacle Mount supporting the original plastic Binnacle
As with all Raptor parts this has a lifetime guarantee.
Custom Land Rover Accessories, Made by Enthusiasts, for Enthusiasts
