Products Archive - Page 2 of 3 - Raptor Engineering

Defender Binnacle

Rated 5.00 out of 5
£68.75 – £83.08

(Standard Binnacle £82.50 including vat, Deluxe Binnacle £92.50 including vat, Switch Plate £7.20 including vat)
A direct replacement for the poor plastic original RHD Binnacle that is broken in many Land Rovers.

The Standard Unit is made from steel with a black powder coat finish. (Image 1 - main image). If you choose to go with the Standard Unit a Bezel in anodised black or silver may be purchased at a later date if required.

For those of you with a Raptor Console or those wishing to upgrade, a Deluxe version is available with an anodised aluminium bezel, available in Black or Silver to match and complement your existing Raptor Console (Images 2 & 3). It is also aesthetically pleasing and gives your gauges a slightly recessed look.

Image 4 - Example of Deluxe Binnacle with Silver Bezel

Image 5 - Example of Deluxe Binnacle with Black Bezel

Image 6 - Optional Switch Plate. This is the replacement for the original Switch Plate located down at your right knee in a Defender, available in anodised silver or black. The hole cut-outs are: 31mm height, 23mm width. Please note this Switch Plate is not suitable or available for Carling/Carling Type Switches.

PLEASE NOTE THAT BOTH THE STANDARD AND DELUXE MODELS DO NOT INCLUDE THE GAUGES ETC.

Although this Binnacle will connect to the original Plastic Binnacle Mount in your Landrover we highly recommend the use of the steel Raptor Binnacle Mount.

No more rattling dashboards, no more broken plastic tabs.
IMPORTANT READ THIS Around the year 2000 (as early as 1998 and as late as 2002) Landrover fitted both pre and post 2000 Binnacles especially NAS. If your Binnacle has the 2 screws holding the warning light cluster in from the front (arrowed in main picture) you need a pre-2000 regardless of the year or registration. If your Binnacle doesn’t have the 2 screws and the cluster is fitted from the back you need a post-2000 regardless of the year of registration. Please note our steel replacement does not have the heater/fan illumination.
PLEASE NOTE: If you wish to purchase the Raptor Binnacle BEZEL ONLY, they are available here >

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender Binnacle (Bezel Only)

£15.00 – £21.00

(Bezel £18.00 including vat, Switch Plate £7.20 including vat)
Available for pre-2000 Defenders (prior to TD5 Dash Facelift) and post-2000 to fit the Raptor Defender Binnacle

For those of you with our standard Raptor Steel Defender Binnacle wishing to upgrade to a Deluxe version, an anodised aluminium Bezel is available in Black or Silver to match and complement your existing Raptor Products.

Image 1 - Black Bezel

Image 2 - Silver Bezel

Images 3 & 5 - Examples of Deluxe Binnacle with Silver Bezel

Images 4 & 6 - Examples of Deluxe Binnacle with Black Bezel

Image 7 - Optional switch plate (available in black or silver)

PLEASE NOTE: This product is the BEZEL ONLY. The Defender Binnacle can be purchased separately here.

THIS BEZEL IS NOT SUITABLE FOR THE ORIGINAL PLASTIC BINNACLE

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender Binnacle Mount

Rated 5.00 out of 5
£37.08 £44.50 inc.VAT

This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in a Defender.

This part has been produced by Raptor due to constant requests from Defender owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
Our Binnacle Mount is suitable for both RHD and LHD vehicles
Image 1 - Defender Binnacle Mount

Image 2 - Example of Defender Binnacle Mount supporting the original plastic Binnacle

As with all Raptor parts this has a lifetime guarantee.

Add to basket Details
Defender Clock Bezel

£20.00

£24.00 including VAT
Includes Bezel and Switch Plate. Fits perfectly over your existing plastic Binnacle, available in anodised silver or black.

PLEASE NOTE THAT THIS BEZEL IS SUITABLE WITH THE ORIGINAL PLASTIC BINNACLE ONLY AND NOT THE RAPTOR STEEL BINNACLE

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender Cubby Box

Rated 5.00 out of 5
£208.33

£250.00 including VAT - available to ship 2-3 working days from payment

Made to the usual high Raptor Engineering standards, this Cubby Box is designed to complement the Raptor Dash Console and Accessories with it's anodised aluminium panels front and back.

Fits 90's Dimensions are 580mm long at its base, 230mm wide and 370mm height. This Cubby Box is not your usual fit all and nothing in particular, this is made to fit the Defender 90 perfectly.

PLEASE NOTE THAT OUR CUBBY BOX IS NOT AVAILABLE FOR OVERSEAS SHIPPING

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender Extended Fuse Box Cover

£52.08

£62.50 including VAT Suitable for pre 2000 Defender (prior to TD5 Dash Facelift). This Extended Replacement Fuse Box Cover gives extra space for switches, sockets, fuse boxes, isolating switches and other electrical components. Made from black powder coated steel with anodised silver or black interchangeable panels. There are different options for the outer panels as well as custom cuts should you require them. To change a fuse, simply remove the front cover . Dimensions are 375mm (length) x 220mm (height). Please note the sockets must be on the right hand side. Please note the Extended Fuse Box Cover is not suitable for TD5 (post 2000) vehicles. Options for outer panels, available in silver or black anodised:
F1 - Blank Panel .

F2 - 2 x Carling Switch cut outs

F3 - 2 x 29mm Socket holes

F4 - Custom cut as F4 and £10.00 +vat extra
THIS PRODUCT IS NOT SUITABLE FOR VEHICLES WITH AIR CONDITIONING FITTED.

Select options This product has multiple variants. The options may be chosen on the product page Details
Defender TD5 Conversion Panel

£41.66

£49.99 including VAT TD5 Conversion Panel ( Suitable for post 2000 vehicles with TD5 Dash uplift ) This panel is designed to fit over your original dash adding strength and rigidity to the plastic dashboard. It allows you to customise your dashboard adding switches/sockets and facilitates the fitting of either a standard Single or Double Din Radio Unit (Double Din cut out is 182mm x 101mm). If you purchase a panel with additional switches or a Double Din you will need to cut away the plastic as necessary Made from anodised aluminium , available in Silver or Black TD5 1   Standard Din Panel includes all original switch pattern with headlamp levelling* TD5 2 Standard Din Panel includes all original switch pattern without headlamp levelling
TD5 3  Double Din Panel (cut out is 182mm x 101mm) includes all original switch pattern with headlamp levelling*

TD5 4 Double Din Panel (cut out is 182mm x 101mm) includes all original switch pattern without headlamp levelling

TD5 5 Standard Din Panel with headlamp levelling* . The electric window and heated seat switch positions are replaced with Carling type switch cut outs

TD5 6 Standard Din Panel without headlamp levelling . The electric window and heated seat switch positions are replaced with Carling type switch cut outs

*Please note that the Headlamp Levelling Switch in your existing Console needs to be removed and refitted directly into the Raptor Panel (the spindle and knob for the switch are not long enough to be left in the original plastic component). This necessitates cutting out some clearance in your existing plastic panel.

The above configurations are the only panels available - custom cuts are not available for this product.

Select options This product has multiple variants. The options may be chosen on the product page Details
Discovery Dash Console

Rated 5.00 out of 5
£65.00
£78.00 including VAT

Powder coated steel construction with a choice of anodised aluminium front panels in silver or black. 400mm length x 100mm height x 185mm deep. Supplied with all fixings - simply bolts to the top of the original Discovery Dash (bolts pass through vent so no visual holes to drill through the dash). Fits Discovery as pictured and the soft dash Range Rover.

Special Cuts
When designing your custom layout please note the panel size: Length 395mm at the bottom, 360mm at the top. Height is 95mm. There is a frame at the back so you will need to have the holes a minimum of 15mm in from each edge.

There is an extra charge of £12.00 +VAT for a special cut panel due to programming.

Please ensure you choose the blank "D10 Please select this panel if you require a special cut" option when selecting your panel choice.

Then tick "I would like to provide my own specifications (£12.00 + VAT) and provide your specifications in the box provided.
Select options This product has multiple variants. The options may be chosen on the product page Details
Gift Voucher

£5.00 – £100.00

Treat a friend, family member or loved one with one of our gift vouchers. Ideal for any special occasion and can be spent on anything in store. Simply select the value of the voucher you wish to purchase, write a personalised message, then go to checkout. We will then send your voucher out to you.

Select options This product has multiple variants. The options may be chosen on the product page Details
LED Lights

Rated 5.00 out of 5
£5.00

£6.00 including VAT

Set of 4 LED Lights.

These fit in the pre machined holes in all Raptor dash console.

The floor and transmission tunnel area of Defenders and S111 are extremely dark even with the interior light on. Drop something and all you can do is feel around for it. These LEDs are just enough to light this area whilst using a very small amount of battery power.

Select options This product has multiple variants. The options may be chosen on the product page Details
Out of stock

On-Off Carling Type Rocker Switch

£4.58 £5.50 inc.VAT

20 Amp ON - OFF rocker Switch.

The same size and fittings as a Carling type switch at half the price.

Compatible with all Raptor none round switch cut outs.

These switches have a red LED that lights up when switched on.

Details
On-Off-On Winch Carling Type Rocker Switch

£5.42 £6.50 inc.VAT

20 Amp ON-OFF-ON Winch Rocker Switch, sprung to centre making it ideal for winch control.

These switches are the same size and fitting as the Carling type switch at half the price.

The switches have a red and green LED that lights up when activated.

They are compatible with all Raptor none round switch cut outs.

Add to basket Details

Shop