£2.95 including VAT
12 V, 20 Amp Switch, available with Red or Blue Light
-
12v/20amp Socket
For 29mm Diameter Hole
-
Cup Holder to be attached anywhere in the vehicle.
-
Out of stock
40 Dash Board Switch Decals These labels are available in silver with black lettering. The self adhesive labels include:- Winch Arm
- Fan
- F Winch
- Winch in
- Winch out
- R winch
- R locker
- F locker
- Fuel
- Charge
- Panic
- Battery 1
- Battery 2
- Spots 1
- Spots 2
- Sidelights
- Driving
- Roof lights
- Hazard
- Gas
- NOS
- Fog lights
- LEDs
- Headlights
- Strobe
- Rear work
- Front work
- Interior light
- Master
- Kill
- Winch out
- Map
- Siren
- Fridge
- Search
- Inverter
- Marker
- Auxiliary 1
- Compressor
- Pump
- Ejector Seat
-
£24.00 including VATIncludes Bezel and Switch Plate. Fits perfectly over your existing plastic Binnacle, available in anodised silver or black.
PLEASE NOTE THAT THIS BEZEL IS SUITABLE WITH THE ORIGINAL PLASTIC BINNACLE ONLY AND NOT THE RAPTOR STEEL BINNACLE
-
Out of stock
20 Amp ON - OFF rocker Switch.
The same size and fittings as a Carling type switch at half the price.
Compatible with all Raptor none round switch cut outs.
These switches have a red LED that lights up when switched on.
-
20 Amp ON-OFF-ON Winch Rocker Switch, sprung to centre making it ideal for winch control.
These switches are the same size and fitting as the Carling type switch at half the price.
The switches have a red and green LED that lights up when activated.
They are compatible with all Raptor none round switch cut outs.
-
£49.20 including VAT
A steel and aluminium dash top Puma Pod for fitting extra switches, gauges and controls to your Puma.
Designed to very exacting standards, the Puma Pod is shaped to fit the Puma only, nesting between the air vents which makes this Pod look like the original equipment whilst offering additional space to a very restrictive dashboard.
There are 4 standard panels available as well as the addition of a custom cut service for your specific needs.
Front panel choices:
PP1 Plain panel to cut to your own requirement
PP2 4x 52mm diameter for 4 gauges
PP5 All Carling Switches
PP6 2x 52mm Holes For Gauges & 4x Carling Switches
Special Cuts
There is an extra charge of £12.00 (+VAT) for a special cut panel due to programming.
Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
Then tick "I would like to provide my own specifications (£12.00 + VAT)" and provide your specifications in the box provided.
-
Polished stainless screws (pack of 20) an upgrade to the standard screws supplied with the Dash Console and Pod. These are marine grade stainless steel and will never rust or tarnish.
-
Single USB Socket - suitable for Raptor Products purchased after 17.3.14
For 29mm Diameter Hole
12v input, 5v output
Matching 12v Socket available
-
This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in an S111
This part has been produced by Raptor due to constant requests from Series 111 owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
As with all Raptor parts this has a lifetime guarantee.
-
(Bezel £18.00 including vat, Switch Plate £7.20 including vat)Available for pre-2000 Defenders (prior to TD5 Dash Facelift) and post-2000 to fit the Raptor Defender Binnacle
For those of you with our standard Raptor Steel Defender Binnacle wishing to upgrade to a Deluxe version, an anodised aluminium Bezel is available in Black or Silver to match and complement your existing Raptor Products.
Image 1 - Black Bezel
Image 2 - Silver Bezel
Images 3 & 5 - Examples of Deluxe Binnacle with Silver Bezel
Images 4 & 6 - Examples of Deluxe Binnacle with Black Bezel
Image 7 - Optional switch plate (available in black or silver)
PLEASE NOTE: This product is the BEZEL ONLY. The Defender Binnacle can be purchased separately here.
THIS BEZEL IS NOT SUITABLE FOR THE ORIGINAL PLASTIC BINNACLE
-
£62.50 including VAT Suitable for pre 2000 Defender (prior to TD5 Dash Facelift). This Extended Replacement Fuse Box Cover gives extra space for switches, sockets, fuse boxes, isolating switches and other electrical components. Made from black powder coated steel with anodised silver or black interchangeable panels. There are different options for the outer panels as well as custom cuts should you require them. To change a fuse, simply remove the front cover . Dimensions are 375mm (length) x 220mm (height). Please note the sockets must be on the right hand side. Please note the Extended Fuse Box Cover is not suitable for TD5 (post 2000) vehicles. Options for outer panels, available in silver or black anodised:F1 - Blank Panel .
F2 - 2 x Carling Switch cut outs
F3 - 2 x 29mm Socket holes
F4 - Custom cut as F4 and £10.00 +vat extra
THIS PRODUCT IS NOT SUITABLE FOR VEHICLES WITH AIR CONDITIONING FITTED. -
£49.99 including VAT TD5 Conversion Panel ( Suitable for post 2000 vehicles with TD5 Dash uplift ) This panel is designed to fit over your original dash adding strength and rigidity to the plastic dashboard. It allows you to customise your dashboard adding switches/sockets and facilitates the fitting of either a standard Single or Double Din Radio Unit (Double Din cut out is 182mm x 101mm). If you purchase a panel with additional switches or a Double Din you will need to cut away the plastic as necessary Made from anodised aluminium , available in Silver or Black TD5 1 Standard Din Panel includes all original switch pattern with headlamp levelling* TD5 2 Standard Din Panel includes all original switch pattern without headlamp levellingTD5 3 Double Din Panel (cut out is 182mm x 101mm) includes all original switch pattern with headlamp levelling*
TD5 4 Double Din Panel (cut out is 182mm x 101mm) includes all original switch pattern without headlamp levelling
TD5 5 Standard Din Panel with headlamp levelling* . The electric window and heated seat switch positions are replaced with Carling type switch cut outs
TD5 6 Standard Din Panel without headlamp levelling . The electric window and heated seat switch positions are replaced with Carling type switch cut outs
*Please note that the Headlamp Levelling Switch in your existing Console needs to be removed and refitted directly into the Raptor Panel (the spindle and knob for the switch are not long enough to be left in the original plastic component). This necessitates cutting out some clearance in your existing plastic panel.
The above configurations are the only panels available - custom cuts are not available for this product.
-
Treat a friend, family member or loved one with one of our gift vouchers. Ideal for any special occasion and can be spent on anything in store. Simply select the value of the voucher you wish to purchase, write a personalised message, then go to checkout. We will then send your voucher out to you. -
Series 111 Binnacle Trim in Anodised Silver. To enhance the look of your existing S111 Binnacle or complement your exiting Raptor products. This also fixes the typical issue where the plastic is broken away round the fixing holes. No more washers and superglue. ( Uses your existing screws )
This product is the Facia Trim only and does not include the Binnacle or Binnacle Mount. For the S111 Binnacle Mount please click here.
-
£7.20 including VAT This is the replacement for the original Switch Plate located down at your right knee in a Defender, available in anodised silver or black. The hole cut-outs are: 31mm height, 23mm width. Please note this Switch Plate is not suitable or available for Carling/Carling Type Switches. -
£19.20 including VAT This is a replacement top panel only for those who already own a Raptor Console. If you are requiring a complete Console please see Defender and S111 Console Dash. The panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. Special Cuts. Please scroll down the page for panel layout information- There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.
- Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
-
£34.00 including VAT This is a replacement bottom panel only for those who already own a Raptor Console. If you are requiring a complete console please see Defender and S111 Console Dash. The panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. If you have a special Raptor Air Conditioning Console you must let us know prior to placing your order as you will need a Special cut panel. Special Cuts. Please scroll down the page for panel layout information
- There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.
- Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
-
£112.00 including VAT Raptor Defender & S111 Double Din Dash Console (suitable for pre 2000 vehicles prior to the TD5 facelift). IMPORTANT please read the whole of this description as it contains critical information regarding this product. The main body of our Double Din Dash Console is a fully welded steel construction with a resilient powder coat finish. The front panels are made from 2mm aircraft grade anodised aluminium available in silver or black. The Console is supplied complete with panels, a full size fitting template, spare screws and an allen key for removal and re fitting of the front panels. The Console can be fitted in around 20 minutes with a few basic tools. Please note this product is not suitable or available for vehicles with air conditioning Double Din cut out is 182mm x 103 mm - this is the standard size for a Double Din Cage, when looking for a Double Din Radio please note most manufacturers will quote the radio size and not the actual Cage size. Universal Cage Mounts are available from the likes of Halfords. Please be aware when buying Double Din Head Units from China that these often don't come with a Mount of any description, some will fit in to a Universal Mount and some will not. There are some units out there usually the full size CD players that come with a Mount that is 113mm tall, these will fit in a 103 Universal Mount or we can provide a 113 cut out ( if you require 113mm please put a note on your order). Also note some manufactures will quote the double din size as 1 dimension such as 7", this is from corner to corner much like measuring a TV, this will not tell you the opening size. Please note that our Double Din Consoles are not available as custom cuts due to the fact that the positioning of the cut out is critical. We strongly recommend you look to our original Dash Console that has more option's, more usable space and a custom cut service available. If you do need a larger screen we would recommend our Defender Dash Console with a single din and that you purchase a CD unit with a pop out double din size screen. Click here to view our original Defender Dash Console. This Double Din Console is not a new product, we have been offering this to those who "must have a Double Din Unit" for many years but we have not made it available on our website until now. As with all Raptor products our Double Din Console is design right protected. -
(Standard Binnacle End Panel £25.00 including vat, Binnacle End Panel with Switch Pod £30.00 inc vat) A quality replacement for the poor original plastic Binnacle End Panel. Manufactured in Steel, powder-coated black to complement the look of your existing Raptor Products and Dashboard. If you have the Raptor steel Binnacle and Mount this replaces the last bit of plastic in and around the Binnacle. Transforms the heater controls as they are now held in position with steel and not plastic Comes complete with all fixtures and fittings including a new much stronger fixing point than the original. No drilling or cutting needed just a screwdriver and Allen Key. (Important we only guarantee the fit of this product if you have the Raptor Steel Binnacle and Mount) Also available complete with a 2 Carling Switch Pod (Switches not included) Image 1 Standard Binnacle End Panel Image 2 Binnacle End Panel complete with a 2 Switch Pod (Switches not included) Image 3 Example of Standard Binnacle End Cap Fitted Image 4 Example of Binnacle End Cap with Switch Pod Fitted -
This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in a Defender.
This part has been produced by Raptor due to constant requests from Defender owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
Our Binnacle Mount is suitable for both RHD and LHD vehiclesImage 1 - Defender Binnacle Mount
Image 2 - Example of Defender Binnacle Mount supporting the original plastic Binnacle
As with all Raptor parts this has a lifetime guarantee.
-
£49.20 including VAT
Fits Defender & Series 111 up to year 2000 (prior to TD5 Dash Facelift) Suitable for RHD Vehicles only.
Works well as a stand alone product or will complement your Raptor Dash Console, giving lockable out of sight storage in your Dashboard.
The Glove Box is made to the usual high quality Raptor standards from steel and aluminium. The frame is powder coated in black with the choice of black or silver for the aluminium door.
The Glove Box has a vented top so your vents are still functional, letting air flow through the Glove Box into the cab.
Although not a necessity we highly recommend that the Glove Box is fitted along with the optional Raptor Defender Trim Panels for an aesthetically pleasing finish to your dashboard.
Please note the Raptor Defender Trim Panels can only be used if you have the Raptor Dash Console fitted.
-
Due to popular demand Raptor has produced this two-part dash trim that will dramatically improve the look of your dashboard (RHD).
Many Defenders & S111 have been drilled, cut and carved in the soft facia of the dash. Many more have a bad fit and uneven joint between the main dash and corner piece. This steel trim will tidy the cut out in your dashboard and create a perfect fit up to the Raptor Console and also gives the opportunity to securely fit other items to your dash.
PLEASE NOTE OUR TRIM PANELS ARE NOT SUITABLE/COMPATIBLE WITH AIRCON FITTED