£2.95 including VAT
12 V, 20 Amp Switch, available with Red or Blue Light
-
12v/20amp Socket
For 29mm Diameter Hole
-
Out of stock
40 Dash Board Switch Decals These labels are available in silver with black lettering. The self adhesive labels include:- Winch Arm
- Fan
- F Winch
- Winch in
- Winch out
- R winch
- R locker
- F locker
- Fuel
- Charge
- Panic
- Battery 1
- Battery 2
- Spots 1
- Spots 2
- Sidelights
- Driving
- Roof lights
- Hazard
- Gas
- NOS
- Fog lights
- LEDs
- Headlights
- Strobe
- Rear work
- Front work
- Interior light
- Master
- Kill
- Winch out
- Map
- Siren
- Fridge
- Search
- Inverter
- Marker
- Auxiliary 1
- Compressor
- Pump
- Ejector Seat
-
£78.00 including VAT
Powder coated steel construction with a choice of anodised aluminium front panels in silver or black. 400mm length x 100mm height x 185mm deep. Supplied with all fixings - simply bolts to the top of the original Discovery Dash (bolts pass through vent so no visual holes to drill through the dash). Fits Discovery as pictured and the soft dash Range Rover.
Special Cuts
When designing your custom layout please note the panel size: Length 395mm at the bottom, 360mm at the top. Height is 95mm. There is a frame at the back so you will need to have the holes a minimum of 15mm in from each edge.- There is an extra charge of £12.00 +VAT for a special cut panel due to programming.
- Please ensure you choose the blank "D10 Please select this panel if you require a special cut" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00 + VAT) and provide your specifications in the box provided.
-
Treat a friend, family member or loved one with one of our gift vouchers. Ideal for any special occasion and can be spent on anything in store. Simply select the value of the voucher you wish to purchase, write a personalised message, then go to checkout. We will then send your voucher out to you. -
£6.00 including VAT
Set of 4 LED Lights.
These fit in the pre machined holes in all Raptor dash console.
The floor and transmission tunnel area of Defenders and S111 are extremely dark even with the interior light on. Drop something and all you can do is feel around for it. These LEDs are just enough to light this area whilst using a very small amount of battery power.
-
Out of stock
20 Amp ON - OFF rocker Switch.
The same size and fittings as a Carling type switch at half the price.
Compatible with all Raptor none round switch cut outs.
These switches have a red LED that lights up when switched on.
-
20 Amp ON-OFF-ON Winch Rocker Switch, sprung to centre making it ideal for winch control.
These switches are the same size and fitting as the Carling type switch at half the price.
The switches have a red and green LED that lights up when activated.
They are compatible with all Raptor none round switch cut outs.
-
The all steel one piece Puma Glove Box comes ready to fit, no fiddly hinges to fit or line up. The Raptor Puma Glove Box has the hinges already fitted to the steel frame and lid panel. If you can use a screwdriver you can fit this in literally 5 minutes. -
£49.20 including VAT
A steel and aluminium dash top Puma Pod for fitting extra switches, gauges and controls to your Puma.
Designed to very exacting standards, the Puma Pod is shaped to fit the Puma only, nesting between the air vents which makes this Pod look like the original equipment whilst offering additional space to a very restrictive dashboard.
There are 4 standard panels available as well as the addition of a custom cut service for your specific needs.
Front panel choices:
PP1 Plain panel to cut to your own requirement
PP2 4x 52mm diameter for 4 gauges
PP5 All Carling Switches
PP6 2x 52mm Holes For Gauges & 4x Carling Switches
Special Cuts
There is an extra charge of £12.00 (+VAT) for a special cut panel due to programming.
Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
Then tick "I would like to provide my own specifications (£12.00 + VAT)" and provide your specifications in the box provided.
-
(Standard Binnacle End Panel £25.00 including vat, Binnacle End Panel with Switch Pod £30.00 inc vat) A quality replacement for the poor original plastic Binnacle End Panel. Manufactured in Steel, powder-coated black to complement the look of your existing Raptor Products and Dashboard. If you have the Raptor steel Binnacle and Mount this replaces the last bit of plastic in and around the Binnacle. Transforms the heater controls as they are now held in position with steel and not plastic Comes complete with all fixtures and fittings including a new much stronger fixing point than the original. No drilling or cutting needed just a screwdriver and Allen Key. (Important we only guarantee the fit of this product if you have the Raptor Steel Binnacle and Mount) Also available complete with a 2 Carling Switch Pod (Switches not included) Image 1 Standard Binnacle End Panel Image 2 Binnacle End Panel complete with a 2 Switch Pod (Switches not included) Image 3 Example of Standard Binnacle End Cap Fitted Image 4 Example of Binnacle End Cap with Switch Pod Fitted -
This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in an S111
This part has been produced by Raptor due to constant requests from Series 111 owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
As with all Raptor parts this has a lifetime guarantee.
-
Series 111 Binnacle Trim in Anodised Silver. To enhance the look of your existing S111 Binnacle or complement your exiting Raptor products. This also fixes the typical issue where the plastic is broken away round the fixing holes. No more washers and superglue. ( Uses your existing screws )
This product is the Facia Trim only and does not include the Binnacle or Binnacle Mount. For the S111 Binnacle Mount please click here.
-
Single USB Socket - suitable for Raptor Products purchased after 17.3.14
For 29mm Diameter Hole
12v input, 5v output
Matching 12v Socket available
-
Polished stainless screws (pack of 20) an upgrade to the standard screws supplied with the Dash Console and Pod. These are marine grade stainless steel and will never rust or tarnish.
-
Cup Holder to be attached anywhere in the vehicle.
-
£95.00 including VAT Suitable for pre 2000 Defender & Series 111 (prior to TD5 Dash Facelift). The main body of the dash is a fully welded steel construction with a resilient powder coat finish. The front panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. The Raptor Dash Console is supplied complete with a top and bottom panel of your choice, CB mounting brackets (fitted) if required, a full size fitting template, spare screws and an allen key for removal and re fitting of the front panels. Please scroll down the page for panel descriptions. The Console can be fitted in around 20 mins with a few basic tools. IF YOUR VEHICLE HAS AIR CONDITIONING YOU MUST LET US KNOW PRIOR TO PLACING AN ORDER AS YOU WILL NEED A CUSTOM AIRCON CONSOLE (£93.33 + VAT) Special Cuts. Please scroll down the page for panel layout information- There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.
- Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
Need help with fitting? Watch this video >
-
£34.00 including VAT This is a replacement bottom panel only for those who already own a Raptor Console. If you are requiring a complete console please see Defender and S111 Console Dash. The panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. If you have a special Raptor Air Conditioning Console you must let us know prior to placing your order as you will need a Special cut panel. Special Cuts. Please scroll down the page for panel layout information
- There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.
- Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
-
£19.20 including VAT This is a replacement top panel only for those who already own a Raptor Console. If you are requiring a complete Console please see Defender and S111 Console Dash. The panels are made from 2mm aircraft grade anodised aluminium which can be easily cut or drilled to your specific requirements if needed. Special Cuts. Please scroll down the page for panel layout information
- There is an extra charge of £12.00 (+vat) for each special cut panel due to programming.
- Please ensure you choose the blank "Provide Specifications" option when selecting your panel choice.
- Then tick "I would like to provide my own specifications (£12.00+vat)" and provide your specifications in the box provided.
-
(Standard Binnacle £82.50 including vat, Deluxe Binnacle £92.50 including vat, Switch Plate £7.20 including vat)A direct replacement for the poor plastic original RHD Binnacle that is broken in many Land Rovers.
The Standard Unit is made from steel with a black powder coat finish. (Image 1 - main image). If you choose to go with the Standard Unit a Bezel in anodised black or silver may be purchased at a later date if required.
For those of you with a Raptor Console or those wishing to upgrade, a Deluxe version is available with an anodised aluminium bezel, available in Black or Silver to match and complement your existing Raptor Console (Images 2 & 3). It is also aesthetically pleasing and gives your gauges a slightly recessed look.
Image 4 - Example of Deluxe Binnacle with Silver Bezel
Image 5 - Example of Deluxe Binnacle with Black Bezel
Image 6 - Optional Switch Plate. This is the replacement for the original Switch Plate located down at your right knee in a Defender, available in anodised silver or black. The hole cut-outs are: 31mm height, 23mm width. Please note this Switch Plate is not suitable or available for Carling/Carling Type Switches.
PLEASE NOTE THAT BOTH THE STANDARD AND DELUXE MODELS DO NOT INCLUDE THE GAUGES ETC.
Although this Binnacle will connect to the original Plastic Binnacle Mount in your Landrover we highly recommend the use of the steel Raptor Binnacle Mount.
No more rattling dashboards, no more broken plastic tabs.
IMPORTANT READ THIS Around the year 2000 (as early as 1998 and as late as 2002) Landrover fitted both pre and post 2000 Binnacles especially NAS. If your Binnacle has the 2 screws holding the warning light cluster in from the front (arrowed in main picture) you need a pre-2000 regardless of the year or registration. If your Binnacle doesn’t have the 2 screws and the cluster is fitted from the back you need a post-2000 regardless of the year of registration. Please note our steel replacement does not have the heater/fan illumination.PLEASE NOTE: If you wish to purchase the Raptor Binnacle BEZEL ONLY, they are available here >
-
(Bezel £18.00 including vat, Switch Plate £7.20 including vat)Available for pre-2000 Defenders (prior to TD5 Dash Facelift) and post-2000 to fit the Raptor Defender Binnacle
For those of you with our standard Raptor Steel Defender Binnacle wishing to upgrade to a Deluxe version, an anodised aluminium Bezel is available in Black or Silver to match and complement your existing Raptor Products.
Image 1 - Black Bezel
Image 2 - Silver Bezel
Images 3 & 5 - Examples of Deluxe Binnacle with Silver Bezel
Images 4 & 6 - Examples of Deluxe Binnacle with Black Bezel
Image 7 - Optional switch plate (available in black or silver)
PLEASE NOTE: This product is the BEZEL ONLY. The Defender Binnacle can be purchased separately here.
THIS BEZEL IS NOT SUITABLE FOR THE ORIGINAL PLASTIC BINNACLE
-
This is a steel replacement for the poor plastic original Binnacle Mount that is split or broken in many Landrovers. Powder coated in satin black to match its surroundings. This component supports the Binnacle which holds the speedometer, gauges and the heater controls in a Defender.
This part has been produced by Raptor due to constant requests from Defender owners for us to manufacture a replacement for their broken one. When we took this part out of our Defender, we were surprised to find how weak the original part is. On removal one of the tabs that hold the Binnacle in place was already broken off and when testing the strength of the remaining tab we were able to break it off between finger and thumb.
Our Binnacle Mount is suitable for both RHD and LHD vehiclesImage 1 - Defender Binnacle Mount
Image 2 - Example of Defender Binnacle Mount supporting the original plastic Binnacle
As with all Raptor parts this has a lifetime guarantee.
-
£49.20 including VAT
Fits Defender & Series 111 up to year 2000 (prior to TD5 Dash Facelift) Suitable for RHD Vehicles only.
Works well as a stand alone product or will complement your Raptor Dash Console, giving lockable out of sight storage in your Dashboard.
The Glove Box is made to the usual high quality Raptor standards from steel and aluminium. The frame is powder coated in black with the choice of black or silver for the aluminium door.
The Glove Box has a vented top so your vents are still functional, letting air flow through the Glove Box into the cab.
Although not a necessity we highly recommend that the Glove Box is fitted along with the optional Raptor Defender Trim Panels for an aesthetically pleasing finish to your dashboard.
Please note the Raptor Defender Trim Panels can only be used if you have the Raptor Dash Console fitted.
-
Due to popular demand Raptor has produced this two-part dash trim that will dramatically improve the look of your dashboard (RHD).
Many Defenders & S111 have been drilled, cut and carved in the soft facia of the dash. Many more have a bad fit and uneven joint between the main dash and corner piece. This steel trim will tidy the cut out in your dashboard and create a perfect fit up to the Raptor Console and also gives the opportunity to securely fit other items to your dash.
PLEASE NOTE OUR TRIM PANELS ARE NOT SUITABLE/COMPATIBLE WITH AIRCON FITTED